Copper Wire Winding coil winding machine Bunching Twisting Machine
1. Technical paramenter
· Wire diameter: 0.19~1.2mm
· Swing diameter: 220mm
· Operation station: 8
· Winding head: 4
· Max stack height: 65mm
· Max stator OD: 120mm
· Max RPM: 2500RPM
· Air source: ≥0.5MPa
· Power supply: 380V 50/60HZ 15KW
· Weight:about 5000KG
With high rotation speed, with constant tension from empty bobbin
to full bobbin, with superior quality for twist wire.The machine is
driven by synchronization strap. Only need to change capstan wheel
to change the pitch. Easy to operate.
This machine has four winding heads and eight operation stations.
High efficiency is its feature. The machine automatically put the
coil into transfer former orderly, especially suitable for high
production capacity requirement, high slot filling rate, small slot
opening stator coil winding. Winding mode, such as auto skip, auto
cutting and auto indexing could be completed at a time
successively; parameter could be set in human-machine interface.
Continuous/discontinues winding way and meets the 2 poles. 4 poles,
6 poles coils winding.
It is applied to the twisting of above 7 PCS of bare copper wires,
tinned wires, silver jacketed wires and enamelled wires and double
twisting for core wires.
This machine is suitable for 2 poles. 4 poles, 6 poles coils
winding machine is one simply semiautomatic winder which used for
very thick wire of toroid coil, and very thick wire with big toroid
core of coil. Like as some big power factor corrector inductos,
power inductors, UPS inductor, And wire insulation film can be
protected in good.
1. Easy to operate.
2. Need cut the required wire length before winding.
3. Easy to switch the winding fixture for different size core.
4. Operation with compressed air.
5. Spread wire by manual.